Disposable Nitrile Gloves

Our EN 455 and EN 374 certified Disposable Nitrile Gloves are manufactured from 100% synthetic acrylonitrile-butadiene rubber — available in 4–8 mil thickness grades — achieving an Acceptable Quality Level (AQL) of ≤1.5 with a minimum force at break of 6.0N, delivering single-use hand protection against contamination, chemicals, and biological hazards across industrial, construction, oil & gas, and facilities management operations throughout the UAE, GCC, Middle East, and Africa. Fully compliant with EN 455-1/2/3/4, EN 374, and applicable regional authority requirements.

Key Features:

• AQL ≤1.5 Pinhole Freedom Rating — Batch water-leak tested per EN 455-1 statistical sampling protocol ensuring less than 1.5% defect rate per production lot
• Minimum 6.0N Force at Break — Tensile strength certified per EN 455-2 both before and after heat ageing, ensuring glove integrity under operational stress
• 4–8 Mil Thickness Range — Available from examination-grade 4 mil to heavy-duty industrial 8 mil, selectable to match site-specific dexterity and protection requirements
• 100% Latex-Free Synthetic Nitrile — Eliminates Type I latex allergy risk, certified safe for prolonged direct skin contact per EN 455-3 biological evaluation
• Powder-Free Construction — Unpowdered inner surface ≤2 mg residual powder per EN 455-3, preventing contamination and reducing dermatitis risk
• Ambidextrous Fit — Symmetrical left/right hand design across sizes XS–XXL for rapid deployment and reduced inventory complexity in high-consumption site environments
• 5-Year Shelf Life Certified — EN 455-4 real-time shelf life testing confirms sustained material integrity and protection performance up to 5 years from manufacture date