Arc Flash Rated Harness

Our ASTM F887-certified Arc Flash Rated Harness features Kevlar®/Nomex® dual-weave or arc-rated nylon webbing — tested at 40 cal/cm² arc flash exposure with zero ignition, melting, or dripping — followed by mandatory post-arc drop testing per ANSI/ASSP Z359 to verify mechanical fall arrest integrity is fully retained after arc flash exposure, engineered for live electrical, utility, and oil & gas operations across the UAE, GCC, Middle East, and Africa.

Key Features:

• 40 cal/cm² Arc Flash Exposure Tested — Full harness tested per ASTM F887 at 40 cal/cm² with zero ignition, melt, or drip per ASTM F2621 mannequin test method
• Post-Arc Drop Test Certified — Harness retains full mechanical fall arrest integrity following arc flash exposure per ANSI/ASSP Z359 drop test protocol
• Kevlar®/Nomex® or Arc-Rated Nylon Webbing — Inherently flame-resistant webbing maintaining structural integrity at 7,000 lbf minimum breaking strength post-arc exposure
• Dielectric Hardware Rated to 35 kV — All D-rings and buckles rated for 35,000V dielectric withstand for live electrical working environments
• Dorsal & Sternal D-Ring Attachment — Dual attachment points for fall arrest and rope access connection in multi-hazard electrical environments
• OSHA 1910.269 Compliant — Mandatory compliance standard for workers exposed to arc flash hazards in electrical power generation and distribution operations